Skip to content
Tools/Return Loss Calculator

Return Loss Calculator

Calculate return loss, VSWR, and reflection coefficient

Input Parameters

Z₀

50Ω

96%
4%
ZL

75Ω

Analysis Results

marginal Match

Marginal match. Consider impedance matching.

Return Loss

13.98 dB

VSWR

1.50:1

|Γ|

0.200

Mismatch Loss

0.177 dB

Power Transmitted

96.0%

Power Reflected

4.0%

Return Loss = -20×log₁₀(|Γ|). Higher is better. Target ≥15dB for good match.

Return Loss Reference

≥20 dBExcellent
15-20 dBGood
10-15 dBMarginal
<10 dBPoor

Key Formulas

Γ = (ZL - Z0) / (ZL + Z0)
RL = -20 × log10(|Γ|)
VSWR = (1 + |Γ|) / (1 - |Γ|)

RF PCB Design

We specialize in controlled impedance and RF boards.

Get Quote

Method, assumptions & worked example

Formula used by this calculator

Γ = |(Z_L − Z₀) / (Z_L + Z₀)|

RL = −20·log₁₀(Γ) [dB]

VSWR = (1 + Γ) / (1 − Γ)

ML = −10·log₁₀(1 − Γ²) [dB]

L-match: Q = √(R_high / R_low − 1)

Z₀
reference (line) impedance
Z_L
load impedance (resistive in this tool)
Γ
magnitude of the reflection coefficient
ML
mismatch loss: power not delivered because of reflection

Source: Pozar, Microwave Engineering, 4th ed. (2012), §2.3 (reflection, return loss, SWR) and §5.1 (L-section matching).

Assumptions & limits

  • Loads are treated as purely resistive. A complex load (R + jX) needs the full complex Γ, which this calculator does not take.
  • Line loss is ignored: a lossy cable or trace makes the return loss measured at the input look better than the load really is.
  • The L-network reactances are for a single frequency; convert to L and C with X_L = ωL and X_C = 1/(ωC) at your design frequency.

Worked example (the calculator's default inputs)

Inputs: Mode: impedance · Z₀ = 50 Ω · Z_L = 75 Ω

  1. Γ = |(75 − 50) / (75 + 50)| = 25 / 125 = 0.200
  2. RL = −20·log₁₀(0.200) = 13.98 dB
  3. VSWR = 1.200 / 0.800 = 1.50
  4. Reflected power = Γ² = 4.0 %; mismatch loss = −10·log₁₀(0.96) = 0.18 dB
  5. L-match (75 Ω > 50 Ω): Q = √(75/50 − 1) = 0.707; series X = 0.707 × 50 = 35.4 Ω, shunt X = 75 / 0.707 = 106.1 Ω

Result: Γ = 0.20, return loss ≈ 14.0 dB, VSWR 1.50, 4 % of power reflected (0.18 dB mismatch loss)

Figures are calculated with the formula above, not measured. Field-solver tools and your fabricator's stack-up data take priority for production impedance and current limits.